When you are selecting a wedding dress there are basically two options. The first is to go with a ready made off-the-shelf variety where there can be some adjustments that can be made. The second is to have a custom dress tailor made. With either choice it is important you get accurate measurements. Here is our advice to get good measurements.
How to Measure a Muslim Wedding Dress
- If you are planning on losing weight, wait until you have reached your goal before you take measurements.
- Use a good quality fabric tape measure. A fabric measure follows your contours the most closely compared to a metal one.
- Have someone with a good eye take your measurements. Do not do this on your own.
- Take measurements with the tape taut but don’t make it too tight.
- Dress in the same or similar underwear as you will on the wedding day.
- Most of the measurements should be taken barefoot. Have your wedding shoes handy and check with your seamstress to know which measurements they need with heels.
- Stand erect and with your feet six inches apart.
- Double, triple check measurements just to make sure they agree.
Bust: It is important to note that the bust is not the same as your bra size. Take the measurement across the fullest part of your bust while keeping your arms hanging down in a relaxed position.
Waist: This is about an inch (2.5 cm) above your naval and the smallest part of your waistline. You want this to be a natural and relaxed state where you can breathe and eat easily, so don’t suck it in.
Height: You need two measurements one barefoot and the other with your wedding shoes.
Hollow to Hem: This measurement is from below the neckline to the heels. Just to be safe take two measurements one barefoot and the other with your wedding shoes.
Sleeve: From armpit to wrist.
Hips: This is the fullest part of your hips across the hipbone.
Depending on the fit and form, your seamstress may need other measurements, including shoulder, inside leg, shoulder to nipple, upper bust, nipple to nipple and lower bust.